本例先说明了如何进行单点的高程差分析，然后说明了道路的起伏分析。前者很直观地比较了两个年份的高程数据之间的差值，体现山区的高程变化（有啥用啊？）后者，一条路上的起点终点起伏多少，可以给驾驶导航提供更多样化的数据。本例使用了高程图层和RouteTask。本例对应的官方例子是：Query Elevation (Points)和Query Elevation (Lines) 1. 点高程差查询 1.1 结果显示选了一个明显的点，绿色的是地形变化前的高程点，红色的球是当前的高程点，代表地表起伏变化的是红色的线（即高程差）。图中随便点击一个点，稍等几秒钟后就会出现高程查询结果。显示的高程图层是当前的高程图层。且不管view上方的白色提示区html构成如何（这个比较简单，html代码没什么逻辑性，一看就懂），来看看其引用： require([ "esri/Map", "esri/views/SceneView", "esri/Graphic", "esri/geometry/Polyline", "esri/layers/ElevationLayer", "esri/symbols/PointSymbol3D", "esri/symbols/ObjectSymbol3DLayer", "esri/symbols/LineSymbol3D", "esri/symbols/LineSymbol3DLayer", "dojo/promise/all", "dojo/domReady!" ], function( Map, SceneView, Graphic, Polyline, ElevationLayer, PointSymbol3D, ObjectSymbol3DLayer, LineSymbol3D, LineSymbol3DLayer, all){ ... } ) 用于填充用的符号和符号图层不说，重点是ElevationLayer。 1.2 骨架 function(...){ var beforeLandslideUrl = "http://sampleserver6.arcgisonline.com/arcgis/rest/services/OsoLandslide/OsoLandslide_Before_3DTerrain/ImageServer/"; var afterLandslideUrl = "http://sampleserver6.arcgisonline.com/arcgis/rest/services/OsoLandslide/OsoLandslide_After_3DTerrain/ImageServer/"; var beforeLandslideLayer = new ElevationLayer({url: beforeLandslideUrl}); var afterLandslideLayer = new ElevationLayer({url: afterLandslideUrl}); var map = new Map({... , ground:{layers:[beforeLandslideLayer, afterLandslideLayer]}}); var view = new View({...}); var afterPointSymbol = new PointSymbol3D({...}); var beforePointSymbol = new PointSymbol3d({...}); var lineSymbol = new LineSymbol3D({...}); var resultsContainer = document.getElementById("resultsDiv"); view.on("click", function(event){...}); document.getElementById("elevAfter").addEventListener("change", function(evt){...}); } 一开头就是两个使用ImageServer的两个高程图层；然后，将map的ground属性设置为这两个高程图层；设置前后点符号和连接他们的线符号样式；主要的是view的click事件，以及是否显示新高程图层（afterLandslideLayer）复选框的change监听事件。 1.3 所以重点就在两个事件上了 1.3.1 click事件由于click事件比较大，缩写成骨架形式： view.on("click",function(event){ resultsContainer.innerHTML = "Query elevation ..."; var position = event.mapPoint; var queryBeforeLandslide = beforeLandslideLayer.queryElevation(position); var queryAfterLandslide = afterLandslideLayer.queryElevation(position); all([queryBeforeLandslide,queryAfterLandslide]) .then(function(results){...}) otherwise(function(error){...}); } ); 首先，把DOM面板上的提示信息写为Query elevation ...，然后获取当前点击的点位置信息position（Point类）。根据这个Point，使用高程图层的空间查询方法queryElevation(Point)，返回一个简单几何体信息。利用这两个返回的的“东西”，使用dojo提供的all方法进行异步操作，如果成功则执行回调函数1，否则执行回调函数2。 otherwise的回调函数比较短，仅仅为DOM元素写入“查询失败”的提示信息。所以重点就在回调函数1： .then(function(results) { var posBeforeLandslide = results[0].geometry; var posAfterLandslide = results[1].geometry; view.graphics.removeAll(); view.graphics.add(new Graphic({ geometry: posBeforeLandslide, symbol: beforePointSymbol })); view.graphics.add(new Graphic({ geometry: posAfterLandslide, symbol: afterPointSymbol })); var lineGeometry = new Polyline({ spatialReference: posBeforeLandslide.spatialReference }); lineGeometry.addPath([posBeforeLandslide, posAfterLandslide ]); view.graphics.add(new Graphic({ geometry: lineGeometry, symbol: lineSymbol })); var elevationDifference = Math.abs(posBeforeLandslide.z - posAfterLandslide.z); resultsContainer.innerHTML = "Elevation difference: " + elevationDifference.toFixed(2) + " m"; }) 从两个返回的“东西”中获得geometry属性，官方还是没写明白results是什么东西... 清除view的图形信息。先添加两个点几何体，然后根据这俩点实例化一条Polyline（使用addPath()方法），把Polyline添加到视图的图形属性中。最后刷新DOM面板上的高程查询信息即可。 1.3.2 复选框的change监听事件这个就比较简单了，也挺有趣。它打勾就代表新的高程图层显示。 document.getElementById("elevAfter").addEventListener("change", function(evt) { afterLandslideLayer.visible = evt.target.checked; beforeOrAfter = evt.target.checked ? "after" : "before"; }); 仅仅是改动了afterLandslideLayer的visible属性而已。最后给出这例的完整HTML代码： <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <meta name="viewport" content="initial-scale=1,maximum-scale=1,user-scalable=no"> <title>Query Elevation (Points) - 4.2</title> <style> html, body, #viewDiv { padding: 0; margin: 0; height: 100%; width: 100%; } #paneDiv { position: absolute; top: 12px; left: 62px; width: 80%; padding: 0 12px 0 12px; background-color: rgba(255, 255, 255, 0.85); border: 1px solid white; color: black; } #resultsDiv { font-size: 1.2em; text-align: center; border-bottom: 1px solid gray; padding: 10px 0px; } #activeElevationLayerDiv { margin: 10px 0; } ul #red { color: rgb(150, 26, 15); } ul #green { color: rgb(21, 150, 15); } ul span { color: black; } ul { margin: 0 0 10px 0; } </style> <link rel="stylesheet" href="https://js.arcgis.com/4.2/esri/css/main.css"> <script src="https://js.arcgis.com/4.2/"></script> <script> require([ "esri/Map", "esri/views/SceneView", "esri/Graphic", "esri/geometry/Polyline", "esri/layers/ElevationLayer", "esri/symbols/PointSymbol3D", "esri/symbols/ObjectSymbol3DLayer", "esri/symbols/LineSymbol3D", "esri/symbols/LineSymbol3DLayer", "dojo/promise/all", "dojo/domReady!" ], function( Map, SceneView, Graphic, Polyline, ElevationLayer, PointSymbol3D, ObjectSymbol3DLayer, LineSymbol3D, LineSymbol3DLayer, all ) { // Create elevation layers var beforeLandslideUrl = "http://sampleserver6.arcgisonline.com/arcgis/rest/services/OsoLandslide/OsoLandslide_Before_3DTerrain/ImageServer/"; var afterLandslideUrl = "http://sampleserver6.arcgisonline.com/arcgis/rest/services/OsoLandslide/OsoLandslide_After_3DTerrain/ImageServer/"; var beforeLandslideLayer = new ElevationLayer({ url: beforeLandslideUrl }); var afterLandslideLayer = new ElevationLayer({ url: afterLandslideUrl }); // Create Map and View var map = new Map({ basemap: "satellite", ground: { layers: [beforeLandslideLayer, afterLandslideLayer] } }); var view = new SceneView({ container: "viewDiv", map: map, camera: { // initial view: heading: 332.8, tilt: 65.5, position: { x: -13563643, y: 6153016, z: 577, spatialReference: { wkid: 3857 } } } }); // Initialize symbols var afterPointSymbol = new PointSymbol3D({ symbolLayers: [new ObjectSymbol3DLayer({ material: { color: [150, 26, 15] }, resources: { primitive: "sphere" }, width: 8 })] }); var beforePointSymbol = new PointSymbol3D({ symbolLayers: [new ObjectSymbol3DLayer({ material: { color: [21, 150, 15] }, resources: { primitive: "sphere" }, width: 8 })] }); var lineSymbol = new LineSymbol3D({ symbolLayers: [new LineSymbol3DLayer({ material: { color: [150, 26, 15] }, size: 1.5 })] }); var resultsContainer = document.getElementById("resultsDiv"); view.on("click", function(event) { resultsContainer.innerHTML = "Querying elevation..."; // Query both elevation layers for the elevation at the clicked map position var position = event.mapPoint; var queryBeforeLandslide = beforeLandslideLayer.queryElevation( position); var queryAfterLandslide = afterLandslideLayer.queryElevation( position); // When both query promises resolve execute the following code all([queryBeforeLandslide, queryAfterLandslide]) .then(function(results) { var posBeforeLandslide = results[0].geometry; var posAfterLandslide = results[1].geometry; // Clear graphics from previous result (if applicable) view.graphics.removeAll(); // Draw a point graphic for position before landslide view.graphics.add(new Graphic({ geometry: posBeforeLandslide, symbol: beforePointSymbol })); // Draw a point graphic for position after landslide view.graphics.add(new Graphic({ geometry: posAfterLandslide, symbol: afterPointSymbol })); // Draw a vertical line that illustrates the elevation difference var lineGeometry = new Polyline({ spatialReference: posBeforeLandslide.spatialReference }); lineGeometry.addPath([posBeforeLandslide, posAfterLandslide ]); view.graphics.add(new Graphic({ geometry: lineGeometry, symbol: lineSymbol })); // Compute and display the difference in elevation var elevationDifference = Math.abs(posBeforeLandslide.z - posAfterLandslide.z); resultsContainer.innerHTML = "Elevation difference: " + elevationDifference.toFixed(2) + " m"; }) .otherwise(function(error) { resultsContainer.innerHTML = "Elevation query failed (" + error.message + ")"; }); }); // When both elevation layers are set "visible", the surface is defined by the latter layer (afterLandslideLayer). // Thus we can toggle between "before" and "after" by toggling the visibility of afterLandslideLayer. document.getElementById("elevAfter").addEventListener("change", function(evt) { afterLandslideLayer.visible = evt.target.checked; beforeOrAfter = evt.target.checked ? "after" : "before"; }); }); </script> </head> <body> <div id="viewDiv"></div> <div id="paneDiv"> <div id="resultsDiv">Click on the map to see the difference in elevation before and after the landslide.</div> <div id="activeElevationLayerDiv"> Legend: <ul> <li id="green"><span>Surface point before landslide</span></li> <li id="red"><span>Surface point after landslide</span></li> </ul> <input type="checkbox" id="elevAfter" checked><label for="elevAfter">Show surface after landslide</label> </div> </div> </body> </html> Query Elevation (Points) 2. 线路高程查询 2.1 先看看结果点击2个以上的点，生成一条最短路径，途径的路线的总长度、总上升和总下降高程均有显示。total ascent和total descent的差值即为起始点终点的高程差。所以这一例是基于最短路径分析的（RouteTask）。 2.2 重点代码（与RouteTask有别的部分）在线和点符号的设置上，和地图和场景的设置上和RouteTask那篇文章有点改动外，几乎是照搬了预设，仅仅对view的click事件进行了修改。重点就放在了： on(view, "click", addStop); function addStop(event){...} function onRouteUpdate(data){...} 这段代码上，前一个方法体是view的click事件，后一个方法体是对查询结果的绘制和路线的更新。先看简单的addStop()方法： function addStop(event) { if (!event.mapPoint) { return; } var stop = new Graphic({ geometry: event.mapPoint, symbol: markerSymbol }); routeLayer.add(stop); routeParams.stops.features.push(stop); if (routeParams.stops.features.length >= 2) { routeTask.solve(routeParams) .then(onRouteUpdated) .otherwise(function(err) { routeLayer.remove(stop); routeParams.stops.features.pop(); console.error(err); }); } } 先检测点击是否产生了mapPoint，是则继续，实例化一个Graphic对象，添加到routeLayer中。然后设置RouteTask必须的RouteParameters参数。如果点击的点数>=2个，执行RouteTask.solve()方法。紧接着异步操作链，成功则继续执行onRouteUpdated()，失败则移除刚刚生成的点（从RouteParameters和GraphicsLayer中删除）。来看看onRouteUpdate()是如何获取高程信息的： function onRouteUpdated(data) { var route = data.routeResults[0].route var geometry = route.geometry; var elevationPromise = map.ground.queryElevation(geometry); elevationPromise.then(function(result) { var path = result.geometry.paths[0]; var ascent = 0; var descent = 0; for (var i = 1; i < path.length; i++) { var d = path[i][2] - path[i - 1][2]; if (d > 0) { ascent += d; } else { descent -= d; } } document.getElementById("distanceDiv").innerHTML = "<p>total distance: " + Math.round(route.attributes.Total_Kilometers * 1000) / 1000 + " km</p>"; document.getElementById("ascDiv").innerHTML = "<p>total ascent: " + Math.round(ascent * 100) / 100 + " m</p>"; document.getElementById("descDiv").innerHTML = "<p>total descent: " + Math.round(descent * 100) / 100 + " m</p>"; routeLayer.add(new Graphic({ geometry: result.geometry, symbol: pathSymbol })); }, function(error) { console.error(error); }) } onRouteUpdate() 从RouteTask.solve()中获取返回值中的route信息，再从route中获取geometry信息。然后利用这个geometry，使用Map对象的ground属性的queryElevation（高程图层的高程查询方法）进行高程查询。对高程查询的结果进行异步操作then()，如果异步操作成功则执行如下的回调函数： elevationPromise.then(function(result) { var path = result.geometry.paths[0]; var ascent = 0; var descent = 0; for (var i = 1; i < path.length; i++) {...} document.getElementById("distanceDiv").innerHTML = ... ; document.getElementById("ascDiv").innerHTML = ... ; document.getElementById("descDiv").innerHTML = ... ; routeLayer.add(new Graphic({ geometry: result.geometry, symbol: pathSymbol })); }, function(error) { console.error(error); } ) 获取查询结果中的geometry中的path信息，使用一个for循环统计高程的上下变化，输出到DOM元素上显示，最后在GraphicsLayer中添加这个线要素查询结果。 3. 总结两个高程查询的例子都是基于高程图层的queryElevation()方法的，而最关键的就是获取需要查询的Geometry。前者是通过点击事件，后者则是通过RouteTask的分析结果。

ArcGIS API for JavaScript 4.2点和线高程查询

vip168

本例先说明了如何进行单点的高程差分析，然后说明了道路的起伏分析。前者很直观地比较了两个年份的高程数据之间的差值，体现山区的高程变化（有啥用啊？）后者，一条路上的起点终点起伏多少，可以给驾驶导航提供更多样化的数据。
本例使用了高程图层和RouteTask。
本例对应的官方例子是：Query Elevation (Points)和Query Elevation (Lines)
1. 点高程差查询
1.1 结果显示
选了一个明显的点，绿色的是地形变化前的高程点，红色的球是当前的高程点，代表地表起伏变化的是红色的线（即高程差）。
图中随便点击一个点，稍等几秒钟后就会出现高程查询结果。显示的高程图层是当前的高程图层。
且不管view上方的白色提示区html构成如何（这个比较简单，html代码没什么逻辑性，一看就懂），来看看其引用：

require([
  "esri/Map",
  "esri/views/SceneView",
  "esri/Graphic",
  "esri/geometry/Polyline",
  "esri/layers/ElevationLayer",
  "esri/symbols/PointSymbol3D",
  "esri/symbols/ObjectSymbol3DLayer",
  "esri/symbols/LineSymbol3D",
  "esri/symbols/LineSymbol3DLayer",
  "dojo/promise/all",
  "dojo/domReady!"
  ], 
   function(
     Map, SceneView, Graphic, Polyline, ElevationLayer, PointSymbol3D,
     ObjectSymbol3DLayer,
     LineSymbol3D, LineSymbol3DLayer, all){
    ...
  }
)